|
|
楼主 |
发表于 2011-2-18 12:56:39| 字数 1,358| - 中国–浙江–宁波 电信/宁波大学北区公寓楼
|
显示全部楼层
还有英文说明书：
PL9010-0 2.5” IDE to Micro SATA Device Adapter
Brief Specification and Manual
Disclaimer
1. All specifications and information are subject to change without notice.
2. All trademarks and logos referenced are registered trademarks of their respective owners.
3. Manual content will change from time to time with different chip, and the driver folders position
also may different for kinds of cards.
Introduction
This adapter will enable users to connect the Micro SATA device to the IDE Host.
General Features
Serial ATA 1.0a Specification compliant
ATA/ATAPI PIO mode 0 to 4
ATA/ATAPI Ultra DMA of transfer rate 16.7,25,33,48,66,100,133,and 150MB/s
ATA/ATAPI LBA48 addressing mode associated with 2-byte sector count
Support 3.3V or 5V Micro SATA Device
Ultra low power consumption
Package contents
2.5” IDE to Micro SATA Device adapter 1 Piece
User Manual 1 Piece
Warranty Card 1 Piece
(Package contents may different, please consult your dealers/retail shops for any missing item in case)
Warning
If there is data stored in your hard drive, please make sure to backup all your existing data before
connecting the adapter card to the computer. Manufacturer is not responsible for data losing due to
abuse, misuse or neglect. Should you have any installation problem, please contact your dealers/retail
shops for assistance.
Liability
For information provided from this manual, our company does not warrant or assume any legal
liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus,
product, or process disclosed.
[ Edited by delphan on 2011-2-18 12:59 ] |
|
狗仔卡
离线
提升卡
置顶卡
变色卡
