【求助】2540p开AMT的新问题

sshhuuoo

使用的是NbDmiFit-1.0E工具，已经通过CPQAMT write reset打开了AMT，BIOS中已经有AMT的选项，XP也发现了新硬件“Intel Management Engine Interface”。
这个时候从DOS启动并输入CPQAMT，提示如下：

VPro Uncommitted
Descriptor Unlocked
Management Engine Enabled
Flash Protection Override disabled

但是开机时提示“WARNING！Machine is not in committed state”。通过百度，解释原因是需要通过brand09来设置AMT Enable。

运行brand09后，提示：

VPro Uncommitted
Descriptor Unlocked
Management Engine Enabled
Flash Protection Override disabled
****************************************

Do you want to enable or disable AMT now [Y, N]?都按提示输入“Y”，

最后却提示“VPro Configuration not supported (Write) Error level=7”。

然后这个时候再输入CPQAMT 提示变为：
VPro Enabled
Descriptor Unlocked
Management Engine Enabled
Flash Protection Override disabled
****************************************
开机没有告警了，但是提示“ME region is not locked”，系统直接挂起。应该是“Descriptor Unlocked”的原因。只能通过WIN+ ← + →重新运行 CPQAMT write reset。

这个“WARNING！Machine is not in committed state”实在不知道如何解决了！请大家帮忙！谢谢！

[ Edited by  sshhuuoo on 2011-4-21 13:28 ]

isaiko

帮顶，一直不知道amt有什么用？

kfg

其实，单机来说，AMT没什么用处，没必要纠结。。

sshhuuoo

QUOTE:

Posted by kfg on 2011-4-21 13:49
其实，单机来说，AMT没什么用处，没必要纠结。。

不是纠结，只是想研究一下

zhanggr

This is AMT Branding Tool and is used to either enable or disable AMT feature
on an HP commercial notebook PC.

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
*Prerequisite:  The motherboard must be in status of "VPro Uncommitted" and "Descriptor Unlocked"
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


The instructions of how to use the tool:

Preparations:

1.        Make an MS DOS bootable USB hard disk.
2.        Unzip the zipped tool file and copy all onto the USB hard disk.
3.        Remove Power-on password if there is any.
4.        Suggest change the system boot-order to "USB Hard Disk FIRST" from F10 setup.


Operation Steps:


1.      Make sure power is off.

2.        Attach the USB hard disk to the system.

3.        Boot system to USB hard disk. The display will stop at

        VPro Uncommitted
        Descriptor Unlocked
        Management Engine disabled
        Flash Protection Override disabled
       ****************************************

        Do you want to enable or disable AMT now [Y, N]?


4.         After you make a choice, the system will be configured and rebooted.


At final, it will display either

     1). AMT-Enabled

        VPro Enabled
        Descriptor Locked
        Management Engine enabled
        Flash Protection Override disabled
or,
     2). AMT-Disabled

        VPro Disabled
        Descriptor Locked
        Management Engine disabled
        Flash Protection Override disabled

**Note: If to re-run the tool, simply either execute autoexec.bat, or reboot the system.

sshhuuoo

是按这个步骤操作的，前面都没有问题，就是最后提示“VPro Configuration not supported (Write) Error level=7”
然后这个时候再输入CPQAMT 提示变为：
VPro Enabled
Descriptor Unlocked
Management Engine Enabled
Flash Protection Override disabled

sshhuuoo

简单来说就是“Descriptor Unlocked”，无法变成“Descriptor locked
”

林海听风

楼主真能折腾

seiki

擦！看成ATM了！

Inactive

这个没啥特殊的作用吧

vyangv

單機用AMT幹嘛?
不懂

zhanggr

致"单机分子": "单机要网卡干嘛?!"

alanqxd

amt到底是干什么用的？win7可以直接开吗？

tzyun81

AMT的客户端控制程序,我在网上没找到,

vyangv

LZ,你開AMT幹嗎?
你管理你家一大票的Laptop?