【原创】搞定2530P管理员密码

xc2z888

HP Notebook PCs - May Be Unable to Unable to Enter F10 System Setup as BIOS Admin if HP ProtectTools is Enabled

NOTICE: The information in this document, including products and software versions, is current as of the Release Date. This document is subject to change without notice.



DESCRIPTION
If the BIOS administrator password is not set, and HP ProtectTools security is enabled in Security Manager, then you may not be able to enter the Computer Setup utility at startup as a BIOS administrator. You will only be allowed to enter the setup as a ProtectTools user with limited access.
SCOPE
The specific notebook PCs affected by this issue are listed in the Hardware Platforms Affected section at the bottom of this advisory.
RESOLUTION
To resolve this issue, create a BIOS administrator password and delete previous ProtectTools user logs by following this procedure:
1.
Download and install the latest SSM utility (SP42536).
ftp://ftp.hp.com/pub/softpaq/sp42501-43000/sp42536.exe

无法安装HP System Software Manager  用WINRAR解压后，在Hewlett-Packard下建一个SSM文件夹，把解压后的文件复制进去
2.
Navigate to c:\Program Files\Hewlett-Packard\SSM .  
WIN764位用管理员运行：命令提示符 c:\Program Files\Hewlett-Packard\SSM
3.
Access biosconfigutility.exe to reset the BIOS administrator password.
a. From a command prompt, navigate to the SSM folder.
b. Type biosconfigutility.exe to start the utility. A list of commands displays.

命令提示符 c:\Program Files\Hewlett-Packard\SSM\biosconfigutility.exe
c. Type /newsetuppassword:"password" to create a new BIOS administrator password.

用管理员运行命令提示符 c:\Program Files\Hewlett-Packard\SSM\newsetuppassword:"password"
d. Close the command window.
4.
Restart the notebook PC and press F10 at startup.
5.
Log in using the new BIOS administrator password.
6.
Choose User Management and delete any previous ProtectTools users.
7.
Save the new settings and exit startup.

lzlml168

这个鬼子文说啥？