X62T平板电脑与wacom笔运作

AlexFlying - X62-27

QUOTE:

horihons 发表于 2017-5-3 10:26
壕，我发现你的技术分真多

Please don't "guan shui"!!!

horihons - X62-15,2181

QUOTE:

AlexFlying 发表于 2017-5-3 10:39
Please don't "guan shui"!!!

i am not"guan shui"!!!
i just worship you

seggybop

QUOTE:

黑鹰武士 发表于 2017-5-3 03:09
Regarding the C1047 short circuit issue, please let us know whether it appears only in this instan ...

No issues when used with the normal X61 body. Here's a picture of an X61T shell to show you the part where it can contact. I am guessing X61T and X60T shells are the same here.


Since you asked, I measured the height of this rib on the X61T shell and on the normal X61. It's ~3.5mm high on X61T and ~3.0mm on X61, so enough difference for a problem.

fanzhensheng

这个62t改的比较到位。

lzlml168

为啥不给技术分

linuxarm

期待国内套件

黑鹰武士

QUOTE:

seggybop 发表于 2017-5-3 14:29
No issues when used with the normal X61 body. Here's a picture of an X61T shell to show you the pa ...

This is a very clear indication. Many thanks.

黑鹰武士

X60t的底壳上有一道棱可能使某个电阻短路，如33#红圈所示。楼主还量了一下这个棱的高度，X61是3mm，X61t是3.5mm，所以将X62主板装到X6xt机身里，很容易导致问题。

有类似想法的兄弟可以对照一下进行处理。

wooda

great job!

and hope my X61T back....


to others: who 来翻译翻译呀。。。

doublefat

a chiglish word  niubility

wowoo124

impressive,  too good to be ture.

pkhc

Do you modify the battery in order to use in X62 motherboard as X61T's battery is not compatible?

seggybop

QUOTE:

pkhc 发表于 2017-5-5 17:59
Do you modify the battery in order to use in X62 motherboard as X61T's battery is not compatible?

According to Lenovo's maintenance manual, X6x battery is 14.4v and X6xT should be 12.6v, but my X6xT batteries are also 14.4v. Maybe fake, but they work fine with no modification.

bhamdhu

Very good！

pkhc

I am sure the battery of X61 is not compatible to X61T using X62's motherborad, I have tried before without sucess. The following is my version of X62T using 10 touch point glass, with led back lite and battery modification (almost complete just only wait for final assembling).

pkhc

The following is the machine run under Windows 10 for your reference.

一户侯

Awesome job！

ibmx40shiji

What is the pressure sensitivity level?

pkhc

Actually is a 10 points touch pad. Originally, I would like to keep the pen input, the cost of control board and programming cost is much higher than the 10 points touch pad  (only RMB160.00 with the touch pad and controller board). Therefore I pull out the wacom touch pad and install the 10 points touch pad overlay on the LCD monitor. As the 10 points touch pad is only an usb device, no need to program, it is much more easy to config than Wacom pen pad (just plug it in the usb 2.0 port will work fine). Therefore I make this conversation instead of maintain the pen. The battery is a custom bulit using 8 cells case with 4pcs Panasonic 3100ma 18650 cells, with X61 battery control board. The orginial battery control board is for 2600ma so it need to reprogram to 3100ma for full charge. Other than the touch pad and the battery the modification is almost same with you.

rmsmajestic - T50-78

QUOTE:

pkhc 发表于 2017-5-8 09:56
The following is the machine run under Windows 10 for your reference.

what's the exact model of the touch panel you used? Is that the panel from that HP tablet?

pkhc

China made bought from Taobao

不得不来 - 送你一朵小红花

What The Funk~~~