T70规格设计基本确定

darkion

心又长草了

AlexFlying - X62-27

QUOTE:

HOPE 发表于 2016-7-30 00:43
T6的14.1与15寸机型主板是相同的，你说呢，呵呵。

忽然想到个问题，
15寸的光驱位是通过一个延长板延长的。
既然光驱位接口改成了sata的，那么这个延长板就不能用原来的了，也得定制一个。

weinster

老大，太好了。是否考虑独显？

weinster

光盘位似乎可以取消了，没啥用。去掉了，省出空间干别的

weinster

是否考虑有Xeon版本？

changer000

minidp不能改雷电2/3吗？

shijun0559

QUOTE:

talkid 发表于 2016-7-30 00:28
只看到三个啊

四个啊，还有光驱位。

weinster

我又来看看有啥进展，这个帖子毒啊

frankchj

刚订了第二批x62，手上还有一台t60高分。长草啊！

jetingb

我的15寸T60不能扔了啊？

zyj77

怎么多大块头 给弄了个集显确实不理想

zyj77

大块头 给弄了个集显确实不理想

oldguy007

支持支持！

iamtanfu

光盘位不宜取消!

yuxyj

这个能换U吗？

zhong370

@HOPE 老大 T61宽屏改造后能用嘛？

kof111

现在市面上的机器 都是太差了 我只想安安静静要个能做事的机器

zyj77

不是独显就没意思了

xman981

QUOTE:

gzjzdavid 发表于 2016-7-30 12:58
能否比较一下宽屏T60跟方屏版主板的尺寸差距，采取延长线一类的方案兼容宽屏版。。。

我是宽屏机，希望Da哥的建议能上议程

gzjzdavid - T50-5 X62-1

QUOTE:

xman981 发表于 2016-8-6 00:26
我是宽屏机，希望Da哥的建议能上议程

我也是宽屏。。。

el-sahef

Sorry for not being able to write in chinese.

Some suggestions:

It would be nice if there could be user accessible test pads or vias for all or at least some unused USB, SATA and PCIe BGA balls of the PCH.  This would enable all  buyers who can solder the addition of own extensions using those ports.

For example, I would like to be able to add a connector in the ultrabay to use self made PCIe based ultrabay modules. On T61 15.4 " widescreen boards, lenovo routed one PCIe lane to the same connector that is also used for their ultrabay serial/parallel adapter (FRU P/N 40Y8124) which uses the LPC interface. For details, see page 67 of the Genbu_5W schematic 42W9293. They seem to have disabled the corresponding PCIe clock outputs on the clock generator via I²C, but if the corresponding pins of the connector are wired to the clock outputs of the PCIe slot for WWAN, PCIe based ultrabay modules do work. I tested this with a self made two-port USB 3.0 PCIe ultrabay module. With the T70 board, I would like to be able to use a self made PCIe based serial + parallel ultrabay module because I still need those old ports for work.


If you can find a source for the connector for the T60 or T61 expresscard/PC-card  slot assembly and have an unused PCIe lane, you could also support the expresscard slot.

可可兔

QUOTE:

el-sahef 发表于 2016-8-9 05:33
Sorry for not being able to write in chinese.

Some suggestions:

Xian jie duan hai chi bu tou. Na xie jie kou zuo bu Liao.

霍瑞鑫

QUOTE:

HOPE 发表于 2016-7-30 21:03
可以象X62那样内置预留一个USB接口。

谢谢老大回复最好是预留内置两个

no5

看来有必要去收台料机备着了。。。。

wjfdongcheng

哈哈，我的T61高分屏有的玩了，还好没有扔了啊！坐等T70！

800208

楼主，R50p支持吗？

15915905885

QUOTE:

HOPE 发表于 2016-7-30 11:41
4:3的应该是不难，宽屏的就可能很大改造了。

可怜，我的就是t61p宽屏

maociwei

已经准备好了料机（T60P和T500各一台，全部15寸高分）和钞票，静等大牛的生产线了。

shiyfyf

老大好久没来更新了

renpcboy

特别期待这款主板的问世