求购128g的ngff2242的ssd

starlily

升级t440s! 如题

屋檐上的猫

帮顶但是帮不了你.我手里都是2280的.

zhangjian998

300

51nb520520

2242联想自己有

wgh031417

Lenovo/联想联想SL700 固态硬盘128G M.2-2242固态硬盘-淘宝网 https://item.taobao.com/item.htm ... amp;id=542876474092 这里不要300，拿走不谢

starship863

本帖最后由 starship863 于 2017-2-14 11:55 编辑

浦科特M7VS，300要不要？TLC、128G，主控性能啥的我也不吹了，当初我也是百度了很久才选中的。具体性能你可以自行百度。

去年冬天买的，损耗很少。刚买完没几天后悔了，容量不够。你要是要我就出了换diy 512G的。

下面是linux下的smart信息，识别不太准，你就看全是100就好了。

smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.8-1-ARCH] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:    PLEXTOR PX-128M7VS
Serial Number: P02637108488
LU WWN Device Id: 5 002303 100b4a031
Add. Product Id:  TS702030
Firmware Version: 1.01
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Size:    512 bytes logical/physical
Rotation Rate: Solid State Device
Device is:       Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Feb 14 11:43:13 2017 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                    was never started.
                                    Auto Offline Data Collection: Disabled.
Self-test execution status:    ( 0) The previous self-test routine completed
                                    without error or no self-test has ever
                                    been run.
Total time to complete Offline
data collection:             ( 10) seconds.
Offline data collection
capabilities:                   (0x15) SMART execute Offline immediate.
                                    No Auto Offline data collection support.
                                    Abort Offline collection upon new
                                    command.
                                    No Offline surface scan supported.
                                    Self-test supported.
                                    No Conveyance Self-test supported.
                                    No Selective Self-test supported.
SMART capabilities:          (0x0003) Saves SMART data before entering
                                    power-saving mode.
                                    Supports SMART auto save timer.
Error logging capability:       (0x01) Error logging supported.
                                    General Purpose Logging supported.
Short self-test routine
recommended polling time:       ( 2) minutes.
Extended self-test routine
recommended polling time:       (  11) minutes.
SCT capabilities:             (0x001d) SCT Status supported.
                                    SCT Error Recovery Control supported.
                                    SCT Feature Control supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME       FLAG    VALUE WORST THRESH TYPE    UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate    0x002f 100 100 000 Pre-fail  Always    -    0
  5 Reallocated_Sector_Ct 0x0003 100 100 000 Pre-fail  Always    -    0
  9 Power_On_Hours       0x0002 100 100 000 Old_age Always    -    926
12 Power_Cycle_Count    0x0003 100 100 000 Pre-fail  Always    -    428
170 Unknown_Attribute    0x0032 100 100 000 Old_age Always    -    0
171 Unknown_Attribute    0x0003 100 100 000 Pre-fail  Always    -    0
172 Unknown_Attribute    0x0003 100 100 000 Pre-fail  Always    -    0
173 Unknown_Attribute    0x0003 100 100 000 Pre-fail  Always    -    6
174 Unknown_Attribute    0x0003 100 100 000 Pre-fail  Always    -    18
175 Program_Fail_Count_Chip 0x0003 100 100 000 Pre-fail  Always    -    0
176 Erase_Fail_Count_Chip 0x0003 100 100 000 Pre-fail  Always    -    0
177 Wear_Leveling_Count    0x0003 100 100 000 Pre-fail  Always    -    8444
178 Used_Rsvd_Blk_Cnt_Chip  0x0003 100 100 000 Pre-fail  Always    -    0
179 Used_Rsvd_Blk_Cnt_Tot 0x0003 100 100 000 Pre-fail  Always    -    0
180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 100 100 000 Pre-fail  Always    -    656
181 Program_Fail_Cnt_Total  0x0003 100 100 000 Pre-fail  Always    -    0
182 Erase_Fail_Count_Total  0x0003 100 100 000 Pre-fail  Always    -    0
183 Runtime_Bad_Block    0x0032 100 100 000 Old_age Always    -    0
184 End-to-End_Error       0x0033 100 100 000 Pre-fail  Always    -    0
187 Reported_Uncorrect    0x0003 100 100 000 Pre-fail  Always    -    0
188 Command_Timeout       0x0032 100 100 000 Old_age Always    -    0
192 Power-Off_Retract_Count 0x0003 100 100 000 Pre-fail  Always    -    18
195 Hardware_ECC_Recovered  0x0003 100 100 000 Pre-fail  Always    -    0
196 Reallocated_Event_Count 0x0003 100 100 000 Pre-fail  Always    -    0
198 Offline_Uncorrectable 0x0003 100 100 000 Pre-fail  Always    -    0
199 UDMA_CRC_Error_Count 0x0003 100 100 000 Pre-fail  Always    -    0
232 Available_Reservd_Space 0x0003 100 100 010 Pre-fail  Always    -    0
233 Media_Wearout_Indicator 0x0003 100 100 000 Pre-fail  Always    -    791
241 Total_LBAs_Written    0x0003 100 100 000 Pre-fail  Always    -    921
242 Total_LBAs_Read       0x0003 100 100 000 Pre-fail  Always    -    272

SMART Error Log Version: 0
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported