X210 20180702 BIOS更新

alpha

QUOTE:

VTF-INO 发表于 2018-7-5 23:07
I reconnected both the LCD side and the MB side connectors again.
However, it was not output to t ...

The link is correct. It's safe to downgrade, and just follow the same steps. If it doesn't work, please ask Hope for fuether tests or maybe refactory.

cnsiny

小红点是 双击安装吗    为啥我装了   没有变化啊

睡眠唤醒  经常鼠标不动了

shengqi1982

QUOTE:

cnsiny 发表于 2018-7-6 09:19
小红点是 双击安装吗    为啥我装了   没有变化啊

睡眠唤醒  经常鼠标不动了

双击必遭HOPE的大锤一击...哎...

maitianshizhe

更新了，确实有效，睡眠唤醒解决了。

VTF-INO

I returned the BIOS to 0502.
The situation did not change.
X210 can not output to the LCD.
Before updating the BIOS to 0702, I could output to the LCD but now I can not do it.
I am very sad.

However, in order to clarify the problem contents, I would like to return to the original LCD.

VTF-INO

QUOTE:

VTF-INO 发表于 2018-7-7 22:50
I returned the BIOS to 0502.
The situation did not change.
X210 can not output to the LCD.

I changed back the original LCD but did not output.
I will organize the situation and post again.
I feel that it seems that power does not flow from the mother to the LCD, after updating BIOS.

VTF-INO

QUOTE:

VTF-INO 发表于 2018-7-7 23:22
I changed back the original LCD but did not output.
I will organize the situation and post again. ...

I will organize the result of so far.

My x210 mother is 2nd lot.

The LCD of WUXGA worked normally until BIOS was updated to 0702.
After updating the BIOS to 0702, it was not output to the LCD.

It does not look like the power is on, and LCD can not be seen from the device manager.
The output of miniDP is normal.
Even if BIOS is returned to 0502, it was not output to the LCD.

I changed the DIP switch setting and connected to the original x201 LCD.
It was not output to the LCD.
I feel that it seems that power does not flow from the mother to the LCD, after updating BIOS.
However, the LCD is visible as a general-purpose LCD from the device manager.
Since the LCD is visible on windows10 pro x64, it is possible to set the screen setting.
Even if I change the setting, the LCD did not turn on.

After this, I plan to remove the button battery and leave it as it is for a while.
If this action does not return to normal, I do not know what to do any more.

HOPE

the wuxga screen is Led back light.

VTF-INO

I reconnected button battery, and turned on.
However the situation was getting worse.
Nothing was output to the LCD of x201.
Furthermore, the output from the miniDP was also about 2 seconds, the output disappeared after the 51nb logo appeared.
HDD access is not available. I waited for more than 5 minutes, but windows did not start.
I repeated the startup several times, but the situation did not change.
Finally, the 51nb logo is no longer displayed.
I can not understand what is going on.
My x210 seems to have caused trouble of mother, with the update of BIOS as a trigger.
What more can I do?


#The WUXGA LCD I purchased is KD122N4 recommended by hope-san.
https://item.taobao.com/item.htm?id=560085475223

lankun

第二批用了 暂时没有问题 谢谢

VTF-INO

I reconnected the button battery and confirmed that I could enter BIOS immediately after startup.
And I confirmed below 3 things.

1.BIOS version is 0502.
2.Restored to default setting.
3.(NVMe) SSD is visible and (NVMe) SSD was the boot device.

However, x210 did not read the SSD after a short time output from the miniDP, the fans only turned.
I could successfully update to 0702 in the past, but it will not be the same as x210 of the other one.
(By the way, I also took some pictures of the situation when BIOS was set to 0702.)
Does my x210 have an initial failure?

Based on the advice of alpha-san, I would like to consult Hope-san with further test, exchange or repair.
How should I contact Hope-san in any way?

HOPE

QUOTE:

VTF-INO 发表于 2018-7-10 22:42
I reconnected the button battery and confirmed that I could enter BIOS immediately after startup.
A ...

my email: hope@ibmnb.com

masterlkp

测试完成  win  1803，lvds盒盖休眠还是起不来   

VTF-INO

QUOTE:

HOPE 发表于 2018-7-10 22:54
my email: hope@ibmnb.com

Thank you!

My email is vtf.ino@gmail.***
*** = com

I will send email soon.

VTF-INO

QUOTE:

HOPE 发表于 2018-7-10 22:54
my email: hope@ibmnb.com

Dear Hope-san,
Thank you for your cooperation.
I already replied on 13 July and 18 July.
However I have not received your reply yet.
I would like to receive your reply.

My e-mail may have gotten into the spam folder.
I am awaiting the day when my x210 is functioning normally.

Best Regards,
VTF-INO

mx911

x210第二版，原装屏幕，手动安装红点驱动，第一次休眠唤醒后还是找不到红点，然后再休眠再唤醒就能找到了

VTF-INO

QUOTE:

HOPE 发表于 2018-7-10 22:54
my email: hope@ibmnb.com

Dear HOPE-san,

Sorry, I will remind.

I have already send the email one week before.
Please, please check the email...

VTF-INO

QUOTE:

HOPE 发表于 2018-7-10 22:54
my email: hope@ibmnb.com

Dear HOPE-san,

I seem that you are not reading mail.
Hence, I will write a reply here.
I would be pleased if you can reply here.

I will send the motherboard to you.

I have never shipped parts to foreign countries by private.
Hence, I expect it will take time for shipping.
I will inform you when I am ready for shipment.

For shipment, please tell me the following two points.

1.Destination
2.List of parts to ship

You are requesting that I send a motherboard.
In order to check accurately, I think that it is better to send my environment as much as possible
(Motherboards, LCDs, internal cable, case, memory, SSD, cards etc,)
Especially, considering the possibility of causing another failure when removing the motherboard from the case, I think that it is better to ship with case.
However, remove button batteries and note batteries to prevent transport trouble.

Please tell me your opinion.

goodffd

更新后，m.2槽位sata协议的ssd又识别不到了。

cqdzx

QUOTE:

goodffd 发表于 2018-9-28 22:35
更新后，m.2槽位sata协议的ssd又识别不到了。

你应该是第一批吧，第一批对于SATA不能使用这个BIOS

jsxyhyj

QUOTE:

VTF-INO 发表于 2018-7-27 19:15

Dear HOPE-san,

I seem that you are not reading mail.

你这个电脑修好了吗？

VTF-INO

QUOTE:

jsxyhyj 发表于 2018-9-30 21:21
你这个电脑修好了吗？

I sent only mother-board to Hope-san and He checked.
After that he said that mother-board was normal.
I am waiting for Mother board return.

I do not know the reason why the screen does not output and other trouble.

goodffd

QUOTE:

cqdzx 发表于 2018-9-28 23:33
你应该是第一批吧，第一批对于SATA不能使用这个BIOS

第二批

deviny

外接显示器显示模糊的问题，还有可能修复吗？这第三批都已出来。