【原创】已经亲自证明，X60s重装系统没问题

黑体辐射

QUOTE:

原帖由 蜡笔 于 2006-3-18 10:23 发表


不是这个意思，我是说你安装XP的时候用F6进入，找一个SATA的ICH6驱动，必须用软盘在装XP之前让机器识别一下SATA硬盘。如果后面还出现找不到硬盘就是联想的问题了。因为我BOSS去联想问过这个，官方已经证实了一 ...

明白了，我还没时间和条件试验。联想默认设定成了AHCI，所以兼容性不好。

toy-box

晕，已经用上60了啊，羡慕

江春南龙

厉害！！！

radius

那就好！

sunny8452

LZ真的是高产啊～～

才5*×帖 就有10个积分了。。

halleys

QUOTE:

原帖由 黑体辐射 于 2006-3-18 14:53 发表


我觉得问题就出在这里，联想把sATA默认设定成了AHCI，所以带来麻烦。应该不是联想故意作了限制，因为这时候买机器的人不可能半年后就换，到时候想装VISTA难道也不行？

安装XP的时候先加载sATA的驱动我没试 ...

应该是这样的

小鸟DVD

败家新目标！

howelee

想问问楼主有没恢复盘?我想恢复成PRO版的

chenhs0701

LZ上个图来看看吧：）

fanjianming

lz太nb了
540帖拿10分的人可能再也找不到了

wzffree

实在是好消息，等T60和R60出来以后，看看主板能不能通用在上双核，楼主的消息解决了不少人的顾虑。

黑体辐射

QUOTE:

原帖由 howelee 于 2006-3-30 20:50 发表
想问问楼主有没恢复盘?我想恢复成PRO版的

日文的恢复盘，要否？

howelee

日文,看到就晕了(看来用不上),我的X60下星期四到,要不要HOME版的恢复?到是我共享出来,不过怕你的X60S用不上

zxcvbasdfg1

收藏备用

davidbeyond

天啦！都已经用上了？
快写试用手记啊！！！

edreamer

这个没啥的,官方网上有详细的说明,就是个SATA的问题,与机器型号没必然的联系

lzgzcy

没问题就好啦！

苍穹寒星

学习备用

croclly

学习中，看来51马上就会进入60的时代了

emray

我靠，都60了，咱2X呢

hilton

好不容易找到楼主说的驱动，上传给大家

hilton

ThinkPad                                             February 14, 2006
Intel(R) Matrix Storage Manager Driver
Version 5.5.0.1035
----------------------------------------------------------------------
Software Name      Intel(R) Matrix Storage Manager Driver
Supported models   ThinkPad T60,T60p
                   ThinkPad X60,X60s
Operating Systems  Windows XP (Home Edition and Professional)
                   Windows 2000
Version            5.5.0.1035
Issue date         February 14, 2006
Supported devices  Intel(R) 82801GBM SATA AHCI Controller
---------------------------------------------------------------------
Released Versions
-----------------
Version 5.5.0.1035  Support for ThinkPad T60,T60p,X60,X60s
----------------------------------------------------------------------
Summary of Changes
Installation Instructions
-------------------------
Note: ThinkPad Software Installer provides update wizard for this package.
[Windows XP]
CLEAN INSTALL:
Before installing the operating system, install Intel(R) Matrix Storage
Manager Driver, as follows:
Note: Be sure to install Intel Matrix Storage Manager Driver before
   installing the operating system. Otherwise your computer will not
   respond; it will only display a blue screen.
1. Attach a diskette drive to your computer.
2. Download Intel Matrix Storage Manager Driver from the Web site and
    extract the driver to C:\DRIVERS\WIN\SATA and copy the driver to
    a diskette.
3. To make sure that SATA AHCI is enabled, start the BIOS Setup
   Utility menu.
4. Select "Config".
5. Select "Serial ATA (SATA)".
6. Select "AHCI".
7. Change the startup sequence of your computer. Following the
    instructions on the Startup menu in the BIOS Setup Utility, set the
    CD-ROM drive to start first.
8. Insert the CD for Windows XP into the CD or DVD drive, and restart
    the computer.
9. To install a third-party SCSI or RAID driver first, press F6.
10. When prompted, select S for Specify Additional Device.
11. When prompted, insert the diskette that you created in step 2, and
    press Enter.
12. Select "Intel(R) 82801 GBM SATA AHCI Controller (Mobile ICH7M)", and
    press Enter.
13. To continue the installation, press Enter again. Leave the diskette
    in the drive until the next reboot; the software may need to be
    copied from the diskette again when the files are copied during
    setup.
14. Follow the instruction to complete the OS installation.
If you do not have a diskette drive, you can install Intel Matrix
Storage Manager Driver by the following alternative procedure:
Note: If you select AHCI for Serial ATA (SATA) in the BIOS Setup
   Utility before installing Intel Matrix Storage Manager Driver,
   your computer will not respond; it will only display a blue screen.
1. Start the BIOS Setup Utility menu.
2. Select "Config".
3. Select "Serial ATA (SATA)".
4. Select "Compatibility".
5. Install Windows XP and Service Pack 2.
6. Download Intel Matrix Storage Manager Driver from the Web site and
    extract the driver to C:\DRIVERS\WIN\SATA.
7. Run Intel Matrix Storage Manager Driver. To do this, go to
    C:\DRIVERS\WIN\SATA\PREPARE, and double-click install.cmd.
8. Turn the computer off and then on again.
9. Start the BIOS Setup Utility menu.
10. Select "Config".
11. Select "Serial ATA (SATA)".
12. Select "AHCI".
13. Start Windows XP. The Welcome to the Found New Hardware Wizard
    appears.
14. Click "No, not this time", and then click "Next".
15. Select Install from a list or specific location (Advanced), and then
    click Next.
16. Select "Search for the best driver in these locations". Then select
    "Include this location in the search:", specify the path,
    C:\DRIVERS\WIN\SATA, and click "Next". The Completing the Found New
    Hardware Wizard appears.
17. Click "Finish".
18. When the System Settings Change window appears, click "Yes". The
    computer restarts.
UPDATE INSTALL:
To update the driver, follow the instructions below:
1. Start Windows XP.
2. Click "Start" and "Control Panel"
3. Click "Performance and Maintenance" and "System"
4. Click "Hardware" tab
5. Click "Device Manager" button
6. Click the "+" mark to expand "IDE ATA/ATAPI controllers"
7. Right-click "Intel(R) 82801GBM SATA AHCI Controller" and click
    "Properties"
8. Click "Driver" tab
9. Click "Update Driver" button
10. Select "No, not this time" and click "Next"
11. Select "Install from a list or specific location"
12. Click "Next" button
13. Select "Search for the best driver in these locations" and
    "Include this location in the search"
14. Click "Browse" button
15. Locate the driver folder and click "OK" button
16. Click "Next" button
    The driver installation starts
17. Click "Finish" button when the installation completes
18. Click "Close" button
[Windows 2000]
CLEAN INSTALL:
Before installing the operating system, install Intel(R) Matrix Storage
Manager Driver, as follows:
Note: Be sure to install Intel Matrix Storage Manager Driver before
   installing the operating system. Otherwise your computer will not
   respond; it will only display a blue screen.
1. Attach a diskette drive to your computer.
2. Download Intel Matrix Storage Manager Driver from the Web site and
    extract the driver to C:\DRIVERS\WIN\SATA and copy the driver to
    a diskette.
3. To make sure that SATA AHCI is enabled, start the BIOS Setup
    Utility menu.
4. Select "Config".
5. Select "Serial ATA (SATA)".
6. Select "AHCI".
7. Change the startup sequence of your computer. Following the
    instructions on the Startup menu in the BIOS Setup Utility, set the
    CD-ROM drive to start first.
8. Insert the CD for Windows 2000 into the CD or DVD drive, and restart
    the computer.
9. To install a third-party SCSI or RAID driver first, press F6.
10. When prompted, select S for Specify Additional Device.
11. When prompted, insert the diskette that you created in step 2, and
    press Enter.
12. Select "Intel(R) 82801 GBM SATA AHCI Controller (Mobile ICH7M)", and
    press Enter.
13. To continue the installation, press Enter again. Leave the diskette
    in the drive until the next reboot; the software may need to be
    copied from the diskette again when the files are copied during
    setup.
14. Follow the instruction to complete the OS installation.
If you do not have a diskette drive, you can install Intel Matrix
Storage Manager Driver by the following alternative procedure:
Note: If you select AHCI for Serial ATA (SATA) in the BIOS Setup
   Utility before installing Intel Matrix Storage Manager Driver,
   your computer will not respond; it will only display a blue screen.
1. Start the BIOS Setup Utility menu.

2. Select "Config".

3. Select "Serial ATA (SATA)".

4. Select "Compatibility".

5. Install Windows 2000 and Service Pack 4.

6. Download Intel Matrix Storage Manager Driver from the Web site and

    extract the driver to C:\DRIVERS\WIN\SATA.

7. Run Intel Matrix Storage Manager Driver. To do this, go to

    C:\DRIVERS\WIN\SATA\PREPARE, and double-click install.cmd.

8. Turn the computer off and then on again.

9. Start the BIOS Setup Utility menu.

10. Select "Config".

11. Select "Serial ATA (SATA)".

12. Select "AHCI".

13. Start Windows 2000. The Welcome to the Found New Hardware Wizard

    appears.

14. Click "Next".

15. Select "Search for a suitable driver for my device (recommended)",

    and then click "Next".

16. Select "Specify a location", and then click "Next".

17. Specify the path, C:\DRIVERS\WIN\SATA, and click "OK". The Driver Files

    Search Results window appears.

18. Click "Next". The Completing the Found New Hardware Wizard appears.

19. Click "Finish".

20. When the System Settings Change window appears, click "Yes". The

    computer restarts.



UPDATE INSTALL:

To update the driver, follow the instructions below:



1. Start Windows 2000

2. Click "Start", select "Settings", and click "Control Panel"

3. Double-click "System"

4. Click "Hardware" tab

5. Click "Device Manager" button

6. Click the "+" mark to expand "IDE ATA/ATAPI controllers"

7. Right-click "Intel(R) 82801GBM SATA AHCI Controller" and click

    "Properties"

8. Click "Driver" tab

9. Click "Update Driver" button

10. Click "Next" button in "Upgrade Device Driver Wizard" dialog box

11. Select "Search for a suitable driver for my device"

12. Click "Next" button

13. Select "Specify a location" only in "Optional search locations"

14. Click "Next" button

15. Click "Browse" button

16. Locate the driver and click "OK" button

17. Click "Next" button

    The driver installation starts

19. Click "Finish" button when the installation completes

20. Click "Close" button



----------------------------------------------------------------------

Determining which version is installed

--------------------------------------

To check the version of the device driver that is installed on your system,

follow the following instructions:



Windows 2000/XP:



1. Right-click the My Computer and click "Properties"

2. Click "Hardware" tab and click "Device Manager" button
3 Click the "+" sign in front of the IDE ATA/ATAPI controllers category
4. Double-click "Intel(R) 82801GBM SATA AHCI Controller"
5. Click "Driver" tab and the driver version is displayed
----------------------------------------------------------------------

hilton

说明文档里我们能看到两种安装方式：
第一种是clean install，
1. Attach a diskette drive to your computer.
1，将一张软盘插入系统软驱（可以用双起U盘实现）
2. Download Intel Matrix Storage Manager Driver from the Web site and  extract the driver to C:\DRIVERS\WIN\SATA and copy the driver to  a diskette.
2，下载Intel Matrix Storage Manager Driver（我上面的帖子已提供）并把其解压到 C:\DRIVERS\WIN\SATA （其实任意地方都行），然后把它拷贝到软盘里。
3. To make sure that SATA AHCI is enabled, start the BIOS Setup  Utility menu.

4. Select "Config".

5. Select "Serial ATA (SATA)".

6. Select "AHCI".
3、4、5、6是告诉大家如何把SATA设置成AHCI模式，这个机器默认就是这样的，基本可以跳过
7. Change the startup sequence of your computer. Following the  instructions on the Startup menu in the BIOS Setup Utility, set the CD-ROM drive to start first.
7，改变启动顺序，光驱第一（这么做的目的是为了从光盘装系统，如果是从硬盘装就不用了）
8. Insert the CD for Windows XP into the CD or DVD drive, and restart the computer.
8，插入Xp安装盘并重启
9. To install a third-party SCSI or RAID driver first, press F6.
9，“安装第三方SCSI或RAID驱动，请按F6
10. When prompted, select S for Specify Additional Device.
10，当安装界面出现，选S表示Specify Additional Device
11. When prompted, insert the diskette that you created in step 2, and  press Enter.
11，然后插入你刚才拷贝了驱动程序的软盘
12. Select "Intel(R) 82801 GBM SATA AHCI Controller (Mobile ICH7M)", and  press Enter.
12，选择Intel(R) 82801 GBM SATA AHCI Controller (Mobile ICH7M，按enter
13. To continue the installation, press Enter again. Leave the diskette  in the drive until the next reboot; the software may need to be  copied from the diskette again when the files are copied during  setup.
13，再按一次enter进行继续安装，不要拿出软盘
14. Follow the instruction to complete the OS installation.
14，继续正常安装操作系统

hilton

第二种方法就是楼主说的方法了，官方文档说明如下
If you do not have a diskette drive, you can install Intel Matrix Storage Manager Driver by the following alternative procedure:
如果你没有软驱，你可以按照下面的方法安装 Intel Matrix Storage Manager Driver
Note: If you select AHCI for Serial ATA (SATA) in the BIOS Setup  Utility before installing Intel Matrix Storage Manager Driver,   your computer will not respond; it will only display a blue screen.
注意：如果你把SATA选成了AHCI模式，那么当你安装 Intel Matrix Storage Manager Driver 之前系统会没有反应，蓝屏
1. Start the BIOS Setup Utility menu.
2. Select "Config".
3. Select "Serial ATA (SATA)".
4. Select "Compatibility".
1～4，就是开机，按F1进bios，然后把SATA选成compatibility模式。
5. Install Windows XP and Service Pack 2.
5，正常安装windows xp
6. Download Intel Matrix Storage Manager Driver from the Web site and  extract the driver to C:\DRIVERS\WIN\SATA.
6，下载 Intel Matrix Storage Manager Driver 并解压到C:\DRIVERS\WIN\SATA
7. Run Intel Matrix Storage Manager Driver. To do this, go to  C:\DRIVERS\WIN\SATA\PREPARE, and double-click install.cmd.
7，运行C:\DRIVERS\WIN\SATA\PREPARE中的install.cmd，安装Intel Matrix Storage Manager Driver
8. Turn the computer off and then on again.
8，重启
9. Start the BIOS Setup Utility menu.
10. Select "Config".
11. Select "Serial ATA (SATA)".
12. Select "AHCI".
9～12，进入bios把sata模式改回AHCI
13. Start Windows XP. The Welcome to the Found New Hardware Wizard  appears.
14. Click "No, not this time", and then click "Next".
15. Select Install from a list or specific location (Advanced), and then  click Next.
16. Select "Search for the best driver in these locations". Then select "Include this location in the search:", specify the path,
C:\DRIVERS\WIN\SATA, and click "Next". The Completing the Found New  Hardware Wizard appears.
17. Click "Finish".
18. When the System Settings Change window appears, click "Yes". The computer restarts.
13～18，进入操作系统，发现新硬件，指向C:\DRIVERS\WIN\SATA完成驱动程序的安装

lovinibm

很有技术含量，学习了

hilton

等我拿到X60了给大家写一个详细的安装操作系统的方法，我的是便宜的4EH，预装了HOME版的系统，驱动什么的原来的盘里都有备份，装起来应该不难，哪位大侠给说说smartdrv具体如何操作？

neo1211

深奥，60系列装系统怎么这么麻烦

wild

其实在Bios关闭AHCI模式就是了  也不必装Intel的驱动了

ZeRoSiLence

已经装完了系统，没有发现SATA的问题，是不是当作兼容盘使用了？有什么弊端？装好了系统，还能再装上面的那个Intel的驱动吗？如何装？

peiwei

我装完了PREPARE\INSTALL.CMD可是设置ahci重起还是蓝屏.这个是为什么啊.郁闷死了.求解!!